Surfact Emma Smart Tracker held in front of refrigerated food distribution vehicles at a loading dock at night
    Surfact

    US FOOD DISTRIBUTION

    Every load. On record.

    Pharma-grade temperature monitoring for every refrigerated vehicle and load. No installation. No gaps. No guesswork

    Explore Emma

    Compliance support · FSMA · SQF · HACCP

    ISO, NIST, Made in Norway, CE and FCC marks
    Installation

    Super simple to install.

    Less than ten seconds from box to live shipment. No technician, no installation project, no downtime for your fleet.

    01
    Unbox the Emma Smart Tracker

    Take Emma out of the box and place it in the case, pallet, trailer or container.

    02
    It wakes up itself

    No hubs, no gateways, no cables. Emma connects over 4G/5G on its own.

    03
    Data starts flowing

    Temperature and location land in the Emma Software within seconds.

    Why food cold chains break

    Most food loads still travel blind.

    01

    Still checking manually?

    Driver checks, handwritten logs and missing records. Temperature visibility shouldn't depend on someone remembering to check.

    02

    Already have telematics?

    Some vehicles are connected, others aren't. And reefer return-air readings don't tell you what's happening around the cargo.

    03

    And third-party carriers?

    Different vehicles. Different systems. The same responsibility for product quality, on trailers you don't control.

    Compliance summary · FSMA / SQF / HACCP

    Emma Smart Tracker uses ISO 17025-certified Sensirion SHT43 sensors to deliver pharma-grade temperature records for food: calibrated, continuous and shareable between shipper, carrier and receiver.

    Sensor
    Sensirion SHT43
    Accreditation
    ISO 17025
    Calibration
    Per-device, traceable
    Drift
    <0.02°F (<0.01°C) / yr
    Emma Smart Tracker held in front of a fleet of trucks and vans
    30 sec

    Mount and go. No wiring, no install crew.

    2-yr

    Battery on standard AAs. Zero recharging.

    4G/5G

    Live across transport operations. No gateways.

    Calibrated

    Individual calibration documentation and traceability.

    Resource · PDF

    Emma Smart Tracker — Technical Datasheet

    Download Technical Datasheet

    Built for US food safety programs

    The records your food safety program asks for.

    01

    FSMA Sanitary Transportation · In force

    Shippers give carriers a written operating temperature. On request, the carrier must show it was maintained, for example with time/temperature data from the shipment. Receivers check for temperature abuse on arrival. Records can be electronic and must be producible within 24 hours.

    02

    SQF Edition 10 · From January 2, 2027

    Loading, transport and staging (12.6.5) becomes a Core Clause. Set points and product temperatures must be recorded at loading and on arrival, not just monitored. A major Core Clause finding costs 7 points.

    03

    FSMA 204 Food Traceability · July 20, 2028

    Shipping and receiving become Critical Tracking Events with lot-level data, and FDA can demand an electronic, sortable record within 24 hours. Temperature isn't a required data element, but every handover moves into digital records.

    04

    HACCP & seafood HACCP

    Continuous monitoring of temperature critical control points in transit and storage, with alerts when limits are breached.

    Neither FSMA nor SQF Edition 10 mandates continuous in-transit logging. Both raise the bar for temperature evidence at every handover, and automatic records are the simplest way to meet it. FSMA and SQF apply to operations and facilities, not devices; using Emma does not by itself establish compliance. Sources: 21 CFR 1.908 and 1.912; FDA Food Traceability Rule (21 CFR Part 1, Subpart S); SQF Code Edition 10.

    Built for flexible deployment

    One Emma. Different ways to monitor.

    Deploy at trailer, temperature-zone or pallet level, including multi-temp loads.

    Refrigerated trailer with pallet showing Emma placement points010203
    • 01 · Vehicle / trailer level

      Mounted in the reefer

      Monitor the vehicle or temperature zone. Mounted with a Surfact bracket — recommended one Emma per temperature zone.

    • 02 · Pallet level

      On top of the pallet

      Follows the goods across 3rd-party carriers and cross-docks, so the shipper keeps visibility end to end.

    • 03 · Inside the load

      Embedded inside the pallet

      Used either stand-alone or wired to the wall, the Emma Smart Tracker is placed in between boxes on the pallet.

    One device. From vehicle-level visibility to the load itself.

    What's asked at each handover

    Temperature records now have to hold up at every handover.

    01 · Loading
    FSMA
    Shipper specifies the operating temperature; loader confirms pre-cooling.
    SQF Ed. 10
    Set point checked and recorded; product temperatures recorded.
    02 · Transit
    FSMA
    Carrier must show the temperature was maintained when asked.
    Today's reality
    Reefer return air and carrier data the shipper doesn't control.
    03 · Arrival
    FSMA
    Receiver checks for temperature abuse. From 2028, receiving data per lot.
    SQF Ed. 10
    Unit settings and product temperatures recorded before and during unloading.

    Emma covers all three: one device in the shipment, one continuous temperature record from loading dock to receiving dock.

    Why automatic records win

    Put Emma in the load. The record builds itself.

    1. 01Proof on request, not reconstructionWhen a shipper or receiver asks for evidence the cold chain held, a continuous log answers it in minutes.
    2. 0224 hours is the new response timeFDA expects records within a day. Paper logs and printouts in a truck cab don't get there.
    3. 03One record across every handoverLoading, transit and arrival on one timeline, instead of three systems owned by three companies.
    4. 04Claims get settled on dataIf product arrives out of spec, you can show where and when the cold chain broke, and who owned it at the time.
    5. 05Fewer audit findingsManual entries are where auditors find gaps. Automatic records remove them.

    Calibration & traceability

    Every Emma has its own calibration documentation.

    Each device is individually identifiable and linked to its own calibration documentation, the evidence SQF auditors and customer QA teams ask for.

    Emma Smart Tracker
    DEVICE ID ff3-a95-d36
    1. 01

      Emma Smart Tracker

    2. 02

      Unique device ID

    3. 03

      Calibration document

    4. 04

      Traceable temperature records

    Front page of the Emma calibration statement for device ff3-a95-d36

    Designed for the real world

    Two years of battery. Seconds to replace.

    Emma runs on standard, replaceable AA batteries. No charging infrastructure, no specialist technicians, no install crew — and no return to Surfact.

    Video · Battery replacement guide

    Prefer written steps? The full guide is in the Surfact Help Center.

    Read the written guide

    Always monitoring

    No coverage? Emma keeps measuring.

    MeasurementTransmission
    1. 01

      Connected

      Live temperature transmission

    2. 02

      No cellular coverage

      Emma continues measuring and stores data locally

    3. 03

      Connection returns

      Stored measurements are automatically uploaded

    4. 04

      Complete temperature history

      No gaps in the record

    Measurement doesn’t depend on cellular coverage.

    Operationally built for scale

    Every vehicle & trailer. Live. Documented.

    Live

    Live temperature and location across your operation.

    Connect

    Modern APIs. Easy integration. Stream data into existing fleet and operating systems.

    Document

    Continuous, objective temperature records for every load, ready for claims, audits and customer QA.

    Alert

    Know when temperature moves outside defined thresholds.

    Mount it. It’s live. Always.

    Surfact Signal · A modern track & trace platform

    One screen for every route running right now.

    Dispatch sees the trailers and the loads. Food safety sees the exceptions and the audit trail. Same data, one source, nothing re-keyed.

    Surfact Signal map, device panel, temperature report and alarm settings

    Modern APIs

    Emma doesn’t need to become another system your team manages.

    Use Surfact directly or stream Emma data into the systems your organization already uses.

    Explore API documentation
    Emma01
    Surfact02
    API03
    Your systems04
    TMSWMSFleet ManagementFood Safety / QA SystemsTraceability (FSMA 204)Customer Portal

    The next step

    Start with the part you can't see.

    Your existing systems stay. Surfact closes the gaps.

    01

    150 refrigerated vehicles

    100 connected, 50 without reliable visibility.

    02

    50 Emma Smart Trackers

    In the unconnected vehicles. No installation project.

    03

    Close the coverage gap

    Temperature monitoring across all 150 vehicles.

    Starting from scratch? The same setup works across your entire fleet.

    Surfact × Food distribution

    Make temperature visibility part of your food safety program.

    From a single pallet to an entire DC network.

    Surfact
    Emma Smart Tracker · Designed in Norway